Drone Services for Oil & Gas in Corpus Christi, TX

Aerial Mapping, LiDAR, Thermal Inspections, Methane Detection, Gas Plume Mapping, and Digital Asset Documentation for Upstream, Midstream, and Downstream Operations Across Texas

DJI Matrice 4 drone render
Corpus Christi water tower inspection

Distributed Assets. Tight Regulations. Zero Margin for Error.

South Texas sits at the center of one of the most active oil and gas regions in the country. The Eagle Ford Shale, Permian Basin pipeline corridors, and the Port of Corpus Christi’s refining and export infrastructure put real pressure on operators to inspect assets faster, document conditions more accurately, and maintain compliance records that hold up under TCEQ and EPA review.

That pressure compounds quickly. Upstream teams need wellpad surveys during active drilling campaigns. Midstream operators manage hundreds of miles of pipeline through remote terrain. Downstream facilities require regular inspection of tanks, flare stacks, and processing equipment where manual access is slow, expensive, and sometimes impossible.

Skyline Drone Mapping (SDM) delivers aerial mapping, LiDAR, visual and thermal inspections, methane detection, emissions mapping, measurement, and digital asset documentation built for the pace and precision of oil and gas operations. Our deliverables support engineering, asset integrity, GIS, HSE, LDAR, environmental, and operations teams with traceable, georeferenced records that integrate into existing workflows while reducing personnel exposure and operational disruption.

Aerial drone view of property

Core Oil & Gas Problems We Solve

SDM Services for Oil & Gas

Mapping & Surveying

← Scroll horizontally →
Service Expanded Deliverables Outputs Why It Matters
Orthomosaic Mapping (2D) RTK/PPK-enabled orthomosaics for wellpads, facilities, tank farms, terminals, construction areas, and pipeline rights-of-way GeoTIFF, KML/KMZ, web viewer Accurate basemaps for planning, coordination, documentation, and GIS integration
Topographic Mapping (DSM/DTM) Terrain surfaces, contours, drainage information, and elevation data for wellpad development, facility expansion, access roads, reclamation, and earthwork planning DSM, DTM, contours, DXF, SHP, GeoTIFF Supports grading, drainage, earthwork, access, and site-development workflows
Drone Surveying & Photogrammetry Control-tied mapping, surface models, planimetric information, and georeferenced datasets supporting survey, engineering, GIS, and construction teams CAD/GIS-ready datasets Rapid site intelligence that complements licensed survey and engineering workflows
LiDAR Mapping Dense point clouds, terrain extraction, corridor mapping, and 3D asset documentation across pipeline rights-of-way, vegetated areas, facility expansions, drainage corridors, and complex aboveground infrastructure LAS/LAZ, DSM, DTM, contours, DXF, SHP, point clouds Provides reliable terrain and asset data in vegetated, remote, or geometrically complex environments

Measurements & Analytics

← Scroll horizontally →
Service Expanded Deliverables Outputs Why It Matters
Volumetrics & Earthwork Measurement Cut/fill analysis and volumes for pad construction and reclamation CSV, PDF, DXF Defensible quantities for cost control and pay applications
ROW Corridor Metrics Distance, clearance, and encroachment measurements along pipeline routes CSV, GIS layers Vegetation management and corridor compliance data
Recurring Monitoring & Change Detection Repeatable capture and comparison of facilities, pads, corridors, construction areas, reclamation sites, and incident locations Comparison maps, change layers, annotated imagery, GIS layers, PDF reports, web viewer Creates a traceable condition history and helps teams identify physical, environmental, or operational changes between inspection cycles

Inspection, Thermal & Emissions Monitoring

← Scroll horizontally →
Service Expanded Deliverables Outputs Why It Matters
Aerial Asset Inspections High-resolution visual inspections of tanks, flare stacks, pipelines, compressor stations, pipe racks, processing equipment, and facility infrastructure Photos, video, annotated imagery, finding logs, PDF reports Provides safer access to elevated, hazardous, remote, or difficult-to-reach assets while supporting maintenance planning
Radiometric Thermal Inspections Heat-pattern analysis of electrical equipment, insulation systems, flare and combustion conditions, tank thermal patterns, mechanical components, and other temperature-related anomalies Radiometric imagery, annotated findings, MP4, PDF reports Supports condition-based maintenance and early investigation of abnormal heat patterns
Optical Gas Imaging (OGI) Specialized infrared visualization and documentation of methane or VOC emissions where detectable under site and environmental conditions OGI video, annotated clips and stills, geotagged finding logs, KML/KMZ, PDF reports Supports leak localization, repair prioritization, LDAR workflows, and emissions documentation
Methane Plume Mapping & Quantification Support Drone-mounted remote methane screening, 2D/3D plume visualization, source localization, and quantification support across facilities, pipelines, and suspected emission areas Plume maps, concentration-path data, KML/KMZ, CSV, PDF, web visualization Rapidly screens large or complex sites and helps teams prioritize closer investigation and repair
Multi-Gas Concentration Mapping In-situ concentration measurements and hyperlocal 2D/3D mapping of configured gases around facilities, suspected sources, and incident areas Concentration maps, CSV, KML/KMZ, georeferenced flight data, PDF reports Adds gas-specific measurements and spatial context for verification, environmental monitoring, and incident response
Gas-detection, emissions-mapping, and inspection deliverables are provided for screening, localization, measurement, documentation, and decision-support purposes. Regulatory applicability depends on the sensor, inspection method, operating conditions, governing program, and operator requirements.

3D & Digital Models

← Scroll horizontally →
Service Expanded Deliverables Outputs Why It Matters
3D Facility Models High-resolution 3D models and point clouds of processing facilities, tank farms, terminals, compressor stations, wellpads, and aboveground infrastructure LAS/LAZ, OBJ, glTF, textured mesh, point cloud, secure web viewer Improves planning, remote review, measurement, coordination, and stakeholder visibility
Oil & Gas Asset Digital Twins Measurable, time-based facility and site models that connect baseline conditions, inspection annotations, thermal findings, gas-detection layers, OGI clips, documents, maintenance records, and recurring comparisons Secure web viewer, annotations, linked media and documents, measurements, GIS layers, inspection history, and time-based comparisons Creates a shared source of truth for operations, integrity, maintenance, environmental review, incident analysis, planning, and decommissioning

Visual Documentation & Communication

← Scroll horizontally →
Service Expanded Deliverables Outputs Why It Matters
Aerial Photo & Video Site documentation for operations, compliance, and investor reporting MP4, JPG Visual record of conditions at a specific point in time
FPV Fly-Throughs Immersive walkthroughs of facilities and infrastructure MP4 Training, planning, and stakeholder communication
Drone survey view of property

Typical Buyers & Decision-Makers

SDM works with pipeline integrity engineers, HSE managers, asset integrity managers, reliability engineers, operations managers, LDAR program managers, emissions and air-quality managers, environmental compliance teams, GIS and survey leads, facility managers, maintenance planners, project managers, and emergency-response or incident-command teams. We support teams responsible for upstream wellpads, midstream pipelines and compressor stations, downstream facilities, tank farms, terminals, construction programs, and recurring asset-inspection portfolios.

Where SDM Fits in the Oil & Gas Lifecycle

← Scroll horizontally →
Lifecycle Stage SDM Value
Exploration & Site Selection Basemaps, topo surfaces, and terrain analysis for pad site evaluation.
Pre-Construction (Wellpad) Topographic mapping, earthwork support, and baseline site documentation.
Active Production & Operations Facility mapping, visual and thermal inspections, methane screening, gas concentration mapping, tank and equipment documentation, and recurring site monitoring.
Asset Integrity & Maintenance Pipeline and facility inspections, thermal condition monitoring, change detection, OGI documentation, digital-twin annotations, and recurring condition records.
Environmental & Regulatory Compliance OGI documentation, methane plume mapping, multi-gas concentration mapping, spill and incident documentation, GIS-ready findings, and traceable inspection records supporting operator programs.
Incident & Emergency Response Rapid visual, thermal, methane, and multi-gas situational mapping; plume and site-condition documentation; georeferenced findings; and shared digital-twin or web-viewer access for response teams.
Decommissioning & Reclamation Pre-closure baselines, infrastructure documentation, volumetrics, terrain models, environmental condition records, removal progress, and before-and-after comparisons.

Ready to Get Better Data Across Your Oil and Gas Assets?

Oil and gas operations across South Texas move fast, and inspection programs have to keep up. SDM gives integrity engineers, operations teams, and HSE managers the aerial data they need to inspect faster, detect issues earlier, and build a defensible record across remote and active infrastructure alike. Whether you need a single wellpad survey or a recurring inspection program built around your asset portfolio, we’ll scope a solution that fits. Contact us to get started.